Powerizeris the Best Multipurpose
Bathroom Cleaner

Step 1: Dissolve one-fourth of a scoop of Powerizer into 32 oz. of warm water.
Step 2: Dampen a cleaning cloth with the solution and wipe over surfaces.
Step 3: Wipe over again with plain water then dry the surface.

Step 1: Add one scoop of Powerizer to one gallon of warm water in a bucket and allow to dissolve.
Step 2: While allowing Powerizer granules to dissolve in water, remove large debris, hair, and dust from the floor using a damp microfiber cleaning cloth and the WonderWedgie Mop.
Step 3: Swap to a fresh microfiber cleaning cloth and begin mopping the floor with enough Powerizer solution to freely move the mop across the floor. As the microfiber cleaning cloth accumulates dirt, rinse before applying more of the Powerizer solution.
Step 4: Rinse the floor to lift the residue after the entire surface has been cleaned with the Powerizer solution. Use water in a squirt or spray bottle to rinse the floor in 5 x 5-foot sections, then dry with a new microfiber cleaning cloth.

Step 1: Dissolve one scoop into a 16 oz. squeeze a bottle full of warm water and pour onto the stain to saturate the area. For tougher stains pour Powerizer granules onto grout lines and add a few drops of water to create a paste.
Step 2: Scrub stains with a dish scrubber, scouring pad, or cleaning cloth.
Step 3: Wipe over again with plain water then let air dry.

Dissolve one cleaning pod into the toilet bowl and 1 scoop into a 16 oz. squeeze a bottle full of warm water and pour it in and around the inside of the bowl. Squirt the remaining solution into the bowl or add another half scoop of powder directly into the bowl.

Step 1: Dissolve one cleaning pod or one-fourth of a scoop of Powerizer into 32 oz. of warm water.
Step 2: Dampen a cleaning cloth with the solution and wipe over the mirror.
Step 3: Wipe over again with plain water then dry the mirror.